Officeworks is the obvious first stop for an office chair in Australia, but a refurbished brand-name chair from Herman Miller, Steelcase or Haworth often outperforms a new mid-range Officeworks model on lumbar support, seat depth and long-term durability, usually for a similar price.
- A refurbished Herman Miller, Steelcase or Haworth chair typically beats a new $300-$500 Officeworks ergonomic chair on adjustability and lifespan.
- Musculoskeletal disorders account for 51% of serious workers' compensation claims in Australia, which is why lumbar and seat-depth adjustment matter more than price.
- Herman Miller backs new chairs with a 12-year parts-and-labour warranty, a useful benchmark for how long a well-built chair should last.
- Officeworks still makes sense for occasional use, a spare desk or a short-term setup.
Why this matters
If you sit at a desk eight hours a day, the chair isn't a minor purchase. Safe Work Australia's workers' compensation data shows musculoskeletal disorders made up 51% of serious claims nationally, and a chair with no real lumbar or seat-depth adjustment is a direct contributor to that risk (see Safe Work Australia's sitting and standing guidance). That's the backdrop for why the chair you choose, new or refurbished, should be judged on mechanisms, not just price.
What Officeworks chairs are actually good for
To be fair to Officeworks: their range is fine for occasional use, a spare desk, or a short-term setup. The issue shows up at the higher end of their range, where chairs marketed as "ergonomic" at $300-$500 are competing against brands that have spent decades engineering lumbar mechanisms, seat pans and tension systems. WorkSafe Queensland's guide to selecting office chairs flags seat pan depth as one of the most commonly mismatched specs on budget chairs — too long for shorter users, too short for taller ones, with neither end properly adjustable.
The alternative: buying a refurbished brand-name chair instead
The main alternative worth considering is a professionally refurbished chair from a brand built specifically for long-term ergonomic use — Herman Miller, Steelcase, Haworth, Humanscale and similar. These brands design chairs to be serviced and to last well over a decade. Herman Miller's own warranty page confirms new chairs carry a 12-year warranty covering parts and labour — a strong signal of how long these mechanisms are engineered to hold up, even though that specific warranty applies to the original purchaser rather than transferring with resale.
The practical upside is cost: a refurbished Aeron or Leap typically lands in a similar price range to a new mid-tier chair from a general retailer, but with engineering several tiers above it — proper pneumatic lumbar adjustment, seat depth adjustment, and a frame built to be repaired rather than replaced.
What to actually compare before you decide
When you're weighing a new mid-range chair against a refurbished premium one, look past the price tag and compare:
- Lumbar adjustability — does it move with your back, or is it a fixed bump in the backrest?
- Seat depth — can the seat pan slide to suit your leg length, or is it one-size-fits-all, the exact issue WorkSafe Queensland calls out above?
- Warranty on the refurbishment, not just the original manufacturer warranty — a reputable seller stands behind the parts they've serviced.
- Tilt tension and recline lock — cheaper chairs often have a single weak tilt setting; ergonomic brands let you fine-tune resistance.
Who should still just go to Officeworks
If you need a chair today for light, occasional use — a guest desk, a kid's homework station, a short-term rental — a general retailer is still the sensible, convenient choice. The case for a refurbished ergonomic chair is strongest when the chair is doing real daily work supporting your back, which is where the Safe Work Australia figures above actually bite.
If you want a broader rundown of what to look for in an ergonomic chair generally, our guide to ergonomic office chairs for home offices is a good next read. If heat is also a factor in your room, our piece on mesh vs fabric chairs in a hot climate covers that angle too.
FAQ
Is a refurbished office chair as good as a new one?
When it's been properly serviced by a reputable seller, with a new gas lift, checked casters and cleaned or reupholstered as needed, a refurbished premium chair typically outperforms a new budget chair because the underlying engineering is a tier above.
Why are Officeworks-style chairs cheaper?
They're built to a price point for general retail, using simpler mechanisms and materials. That means less adjustability and a shorter realistic lifespan under daily use, not necessarily poor quality for occasional sitting.
What should I check before buying a used office chair?
Ask about the refurbishment process, what's been replaced (gas lift, casters, foam), and whether there's a warranty on the work, not just the chair's age or brand name.
Does Herman Miller's warranty cover a second-hand chair?
No. Herman Miller's 12-year parts-and-labour warranty applies to the original purchaser. A refurbished chair's warranty, if any, comes from the seller who refurbished it.
How much does an ergonomic office chair cost in Australia?
Pricing varies by model, condition and seller, so check current pricing directly rather than relying on a fixed figure. Compare a refurbished premium chair against a new mid-range chair on adjustability, not just the sticker price.
What makes a chair genuinely ergonomic rather than just marketed that way?
Real adjustability: independent lumbar support, seat depth adjustment, tilt tension control and height-adjustable arms, not just a curved backrest shape sold as "ergonomic".
One last thing
A chair's price tag tells you almost nothing about how long its gas lift or lumbar mechanism will actually last. The brand's engineering history and the seller's refurbishment standard tell you far more than the sticker price ever will.